Related Articles
- Wrest-plank/pinblock pin block
- Wrest-plank screw/ plate screw
- Wrest-pin/tuning pin
- Wrest-pin/tuning pin bushing
- String
- Bearing-felt / stringing or counter-bearing felt
- Pressure-bar
- Pressure-bar screw
- V-bar, iron bridge, top bridge/V-bar
- Sound-board brace / liner
- Sound-board, sounding-board, belly/soundboard
- Sound-board brace, bearing-piece, shim packing/plate shim
- Wrest-plank cover / pinblock cover
- (Iron) frame / plate
- Action-standard bolt / action-bracket bolt
- Action-standard/ action bracket
- Action-standard nut/ action-bracket-bolt nut
- Action-standard locating foot/ action-bracket pivot
- Cup-headed bolt/ cup bolt
- Bushing for cup-headed bolt / for cup-bolt socket
- Nut for cup-headed bolt / cup-bolt locknut
- Washer
- Capstan(-)screw
- Hammer-rail beam, butt- rail / action rail
- Butt-rail strengthening-angle / action-rail reinforcement
- Lock-rail, lock-board / keyslip, key slip
- Lock-rail screw/ keyslip screw
- Lock-rail setting-screw / keyslip set screw
- Key-bottom, key-bed / keybed, key bed
- Front-rail / front rail
- Balance-rail / balance rail
- Front-pins, bat-pins / front-rail pins
- Front key(-)bushings
- Balance-pins / balance-rail pins
- Centre key-bushings / key-button bushings
- Balance-washers, balance-rail washers / balance-rail punchings
- (Key-)chase / key-button central
- Key(-)numbers
- Back-touch (baize) / back-rail-strip
- Natural
- Sharp
- Key(-)top for Natural
- Key(-)front for Natural
- Key(-)lead
- Point for measuring weight and blow / down- and up-travel weight
- Lever, wippen / w(h)ippen
- Pilot-cloth / w(h)ippen cushion
- Lever centre-pin / w(h)ippen center pin
- Lever-flange / w(h)ippen flange
- Lever-flange screw / w(h)ippen-flange screw
- Locating-wire for lever flange / w(h)ippen flange for Lever-flange
- Damper(-)spoon
- Damper(-)rod
- Damper-rod hinge / damper rod hinge or hanger
- Damper-tail cloth or covering / damper-lever felt
- Damper-lift regulating screw / damper-lever set or regulating screw
- Damper-rod lever for 67 / damper-rod tongue
- Damper-stem, damper body / damper lever
- Damper-stem wire / damper wire
- Damper(-)drum (if cylindrical), damper(-)block
- Damper-drum screw, damper block screw
- Damper(-)head
- Damper-head felt / damper felt
- Damper-slap-rail or check-rail / spring or damper stop rail
- Damper-check-rail cloth / spring-rail felt, damper-stop-rail felt
- Damper-flange, damper-stem flange / damper-lever flange
- Screw for damper-lever flange
- Centre / center pin for damper-lever flange
- Damper(-)spring
- Damper-spring bushing
- Hammer(-)butt
- Hammer(-)butt spring
- Hammer-butt-spring loop (cord)
- Hammer-butt-spring(-cord) bushing
- Hammer-butt flange, butt(-)flange
- Hammer center / Center pin
- Hammer-butt plate, butt(-)plate
- (Hammer-)butt-notch pad or (hammer-)butt-cloth and (hammer-)butt leather
- Balance-hammer / back stop, catcher, butt check, butt heel
- Leather/buckskin for back stop
- (Bridle-)tape, tie-tape/bridle strap
- (Bridle-)tape or tie-tape end / bridle-strap tip
- Bridle-wire, tie-tape wire / bridle wire
- Jack
- Hammer-butt cushion
- Jack spring
- Jack flange
- Jack center pin
- Jack stop rail
- Set or regulating screw for Jack stop rail
- Set-off button / regulating button
- Set-off screw / regulating screw
- Set-off rail / regulating rail
- Forked set-off stay, fork-screw, pin-rail stay
- Check / back check
- Check felt / back-check felt
- Check wire / back-check wire
- Hammer shank
- Hammer molding
- Hammer top felt
